How to Build Fast Electric RC Cars (RC Car Kit )
After the good experience with "Ready To Run" is the remote control, then it is advisable, fast electric remote control car or normally 'pro remote car kits "in their own. This type of remote control car is designed for professional racers and person who has a good driving skills. Normally, the standard package of components of this remote control car to the main frame that contains only need to assemble and IT components to complete the main frame. AThe installation of remote control from your car yourself is not easy, but it usually takes about 4 to 5 hours over.
Advantage of being Pro-Kit:
1 All selection of car accessories are remote in hand, you can choose between different types and manufacturers remote for your car.
2 You will know better the construction of your fast electric cars remote control. To understand it is important for the maintenance of buildings, or if you need to replace all the parties to the caseof broken or worn.
For the construction, you need a set of tools to help you. Tools such as screwdrivers (small and medium-sized), socket wrench, knife, hobby, side cutters, scissors, forceps, clamps and quick dry glue. (The duration of the measure gravity) are not included. Other tools that enable fast remote control electric cars as different sizes of Allen keys, Cross Keys, Keys tensioner and wire are needed to build the lock nut included in this package. (You candifference from each manufacturer of remote control cars )
Consideration before you start building your fast electric remote control cars.
1. Understand instruction guidelines.-Read and understand instructions carefully, follow the figure.
2. Perform your task on clean and tidy surface-The kit contain a small parts, probably your car parts loss is high on the scattered surface.
3. Cut off only the molded part which you would like to assemble to avoid the part mixed with other section of car parts-The kit component come with a few set of plastic molded parts, normally each set represent each section of remote control car and it comes with numbering on each part.
4. Remove access plastics or burr after cut off it from the part tree - This is needed when you assemble front and rear shock. Access plastic or burr will prevent the shock operating smoothly.
5. When you assemble ball end or ball cup on turnbuckle, make sure length from end to end is strictly follow the length which instructed in instruction manual - These part is assemble at critical section of your car.
6. Pay attention on unused parts and option parts - Package come along with used, unused and option parts.
7. After assembling process completed, make sure all screw and lock nut tightened enough but not over tightened.
After completed, you need another equipment like Transmitter, Servo, Receiver, Electric speed controller, Motor, Battery ( 7.2V 6 cells ), Battery charger, Rubber tires, Tire inserts and painted body shell. To make your car perfect you are advised to make an alignment on your car like Toe angle, Camber angle, Ride height and etc.
No comments:
Post a Comment